Mode d'emploi MARANTZ RC5500SR

[. . . ] Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements for the grounding electrode. [. . . ] SCAN/V-OFF 0 CHANNEL/SKIP PURE DIRECT * Selects the Pure Direct mode NIGHT * Turns on or off the NIGHT mode DISPLAY * Change the front display mode Surround mode (1-8) Selects the surround mode 7. DIRECT 2 Tunes a station Selects the auto stereo mode or mono mode Selects the “Frequency direct input” 7 CLEAR MEMO 8 A/D 9 P. €¢ As the input is changed, the SR5500 will automatically switch to the digital input, surround mode, attenuation, and night mode status which were entered during the configuration process for that source. 1CH INPUT component To select the surround mode during playback, press the SURROUND MODE button on the front panel or the Surround mode buttons on the remote. €¢ When the signal is not decoded, the mode is changed to AUTO mode automatically. Notes: • Pro Logic IIx mode will decode as Pro Logic II mode when the SURROUND BACK SPEAKER is set NONE in SPEAKER SETUP menu. Depending on source material, you can select CSII-Cinema mode, CSII-Music mode or CSIIMono mode. According to the signals to be played back, DTS NEO:6 uses either the NEO:6 CINEMA mode optimized for movie playback or the NEO:6 MUSIC mode optimized for music playback. [. . . ] In Digital Auto mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected automatically. [. . . ]