Mode d'emploi SONY HXR-NX100

[. . . ] €¢ Because of the way that the image device (CMOS sensor) reads out image signals, the following phenomena may occur. [. . . ] Available menus in DV mode only (REC/OUT SET) – WIDE REC – CANCEL DV MODE 37 Adjusting the brightness You can adjust the image brightness by adjusting the iris, gain or shutter speed, or by adjusting the light volume with the ND filter switch B. Shooting in dimly lit locations (LOW LUX) You can shoot bright video, even in low light conditions, such as outdoor locations with limited street lighting or dimly lit indoors, by automatically optimizing the gain and shutter speed. 5 Recording • There is no still image shooting mode on the camcorder. Z Tips • Clear image zoom maintains an image quality that is close to the original. Audio level meters The shutter speed equal to the period that your camcorder reads image data from the image sensor is defined as 360 degrees. Because of the way that the image device (CMOS sensor) reads out image signals, the subjects passing by the frame rapidly might appear crooked depending on the recording conditions. €¢ Select the recording media and image quality of the image you want to play back on the thumbnail screen (p. Doing so might damage image files, or prevent image files from being played back. [. . . ] €¢ Damaged or lost image data will not be compensated for, and may occur in the following cases: – If you eject the memory card, turn the power off on your camcorder, or remove the battery pack for replacement while your camcorder is reading or writing image files on the memory card (while the access lamp is lit or flashing). [. . . ]