Mode d'emploi TOYOTA MIRAI

[. . . ] 2 Turn the power switch to ACCESSORY mode or ON mode, or 4 Operation of each component fasten a seat belt. [. . . ] –  Power mode automatic deactivation Power mode is automatically deactivated if the power switch is turned off after driving in power mode. — If the wiper switch is turned to the “AUTO” position while the power switch is in ON mode, the wipers will operate once to show that “AUTO” mode is activated. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 400 ft. Using the driving support systems 209 Selecting constant speed control mode When constant speed control mode is selected, your vehicle will maintain a set speed without controlling the vehicle-to-vehicle distance. Select this mode only when vehicle-to-vehicle distance control mode does not function correctly due to dirt, etc. When in constant speed control mode, to return to vehicle-to-vehicle distance control mode, push the lever forward again and hold for approximately 1 second. –  Automatic cancelation of vehicle-to-vehicle distance control mode Vehicle-to-vehicle distance control mode is automatically canceled in the following situations: ● Actual vehicle speed falls below approximately 25 mph (40 km/h). –  Automatic mode indicator If the fan speed setting or air flow modes are operated, the automatic mode indicator goes off. [. . . ] — Recirculated air mode is selected as a default mode when the power switch is turned to ON mode. [. . . ]