Mode d'emploi WHIRLPOOL AWZ8CD PRO

[. . . ] Select and start programme “Synthetics” at 60°C (see separate the programme chart). [. . . ] Select and start programme “Synthetics” at 60°C (see separate the programme chart). €¢ Immediately after end of programme, start the “Rinse and Spin” programme to eliminate any residual bleach smell; if you want, you can add softener. The lowest remaining moisture content can be achieved using the wash programme referred to by the Energy Label, with maximum spin speed. EN 9 Appliance does not start although “Start(Pause)” has been pressed Appliance stops during the programme, and the “Start(Pause)” light blinks Detergent dispenser contains residues from detergent/additives at end of wash Appliance vibrates during spin cycle Final spin results are poor “Unbalance during spinning” The “Spin/Drain” indicator in the programme flow bar blinks, or the spin speed on the display blinks, or the spin speed indicator blinks after the end of the programme (depending on the model). Programme duration is considerably longer or shorter as indicated in the “programme chart” or on the display (if available) Description of failure indicators Failure indicator lights up Indication on display (if available) “bdd” (in case your washing machine has no display: all lamps of the programme flow bar light up) from “F02” to “F35” (except “F09”) Description - Causes - Solutions Appliance stops during the programme. [. . . ] EN 9 Appliance does not start although “Start(Pause)” has been pressed Appliance stops during the programme, and the “Start(Pause)” light blinks Detergent dispenser contains residues from detergent/additives at end of wash Appliance vibrates during spin cycle Final spin results are poor “Unbalance during spinning” The “Spin/Drain” indicator in the programme flow bar blinks, or the spin speed on the display blinks, or the spin speed indicator blinks after the end of the programme (depending on the model). [. . . ]